Mavic ID360 Freehub Body V2

No, this specific freehub body is designed exclusively for Mavic wheels equipped with the ID360 hub system. It will not fit older Mavic hub designs, so please verify your wheelset uses the ID360 architecture before purchasing.

This version is specifically engineered for Shimano/SRAM 11-speed cassettes. If you are running a 12-speed setup, you will likely need a different freehub body standard, such as Micro Spline or XDR, depending on your cassette.

Generally, the ID360 system is designed for tool-free removal. You typically just need to pull the end cap off by hand or with a light tap, slide the old body off, and slide the new one on, ensuring the pawls and springs are seated correctly.

You should consider a replacement if you notice excessive play in the cassette, skipping under load, or if the internal pawls are no longer engaging crisply. It is also a necessary upgrade if you are switching your drivetrain to a different cassette standard.

Yes, this unit typically arrives as a complete assembly ready for installation. However, it is always good practice to inspect your existing hub shell for debris and apply a fresh, thin layer of Mavic-approved freehub oil before sliding the new body into place.