Arctic Armor Mesh Safety Cover

This cover is specifically engineered for a 14' x 28' rectangular in-ground pool. Because safety covers rely on precise tensioning to function correctly, it is not recommended for pools with different dimensions or non-rectangular shapes.

The mesh is designed to allow water to pass through, which prevents the buildup of heavy puddles or ice on the surface. This drainage feature reduces the stress on your pool structure and the cover itself during the winter months.

Installation requires drilling into your pool deck to set the brass anchors. While the process is straightforward, you will need a hammer drill and a masonry bit to secure the anchors properly into concrete or paver surfaces.

Yes, the fine mesh construction is effective at screening out leaves, twigs, and most pine needles. While some very fine silt may eventually pass through, it will significantly reduce the amount of cleaning required when you open your pool in the spring.

The brass anchors are designed to recess flush with your deck surface. Once the cover and springs are removed, the anchors sit level with the ground, eliminating tripping hazards and allowing you to walk freely around the pool.

Yes, this is a safety-rated cover with a break strength of over 4,000 lbs. It is designed to prevent accidental falls, providing a secure barrier for children and pets when properly installed and tensioned.