Schwalbe Tubeless Rim Tape

The tape width should match the internal rim width of your wheel. You want the tape to cover the spoke holes completely and extend slightly up the sidewalls, but it should not climb too high up the rim wall, as this can interfere with tire seating.

No. You should only use this tape on rims that are explicitly certified by the manufacturer for tubeless setups. Using it on non-tubeless rims can result in an insecure tire fit and potential safety hazards.

Yes, preparation is critical. Thoroughly clean the rim bed with isopropyl alcohol to remove any grease, old sealant, or debris. A clean, dry surface ensures the adhesive bonds properly and creates an airtight seal.

You should start applying the tape a few inches before the valve hole and continue all the way around, finishing a few inches past the valve hole. This creates a double-layered overlap at the most critical point, which helps prevent air leaks around the valve stem.

While the tape is durable, it should be inspected whenever you change your tires. If you notice the edges lifting, the adhesive failing, or signs of sealant seeping underneath, it is time to remove it and apply a fresh layer.