Wilderness Systems Trolling Motor Mount

While it is specifically designed for Wilderness Systems models like the Radar, ATAK, and Recon, the mount is universal in nature. You will need to verify that your kayak's stern can accommodate the 3.75-inch by 4.75-inch mounting hole pattern and has enough flat surface area for the bracket.

This mount is rated for motors up to 3 HP and a maximum of 36 lb of thrust. It also has a total weight capacity of 45 lb, so ensure your motor setup stays within these limits to prevent damage to your kayak's stern.

Yes, this is a permanent, DIY installation that requires drilling holes into your kayak's stern to secure the bracket. We recommend double-checking your placement and ensuring you have access to the inside of the hull to install the marine board backing plate before you begin.

The marine board backing plate is essential for distributing the stress of the motor across a larger surface area of the kayak's plastic hull. It prevents the mount from flexing or pulling through the plastic under the torque and vibration of the motor.

The 13-gauge stainless steel is highly resistant to corrosion, making it suitable for both freshwater and saltwater environments. However, as with all marine gear, we recommend rinsing the bracket with fresh water after use in saltwater to maintain its longevity.