The Outdoor Plus Roma Fire and Water Bowl

Yes, but you must ensure the surface is non-combustible or use a heat-resistant pad underneath. Because this is a permanent, non-portable installation, it is best to consult local building codes regarding fire features on wooden structures before installation.

The 12V Electronic ignition allows you to light the fire bowl with the flip of a switch or remote, offering maximum convenience. The Match Lit system is a manual ignition that requires you to light the burner with a lighter while turning on the gas valve, which is simpler but requires more hands-on operation.

Yes, the water feature and the fire burner operate on separate systems. You can run the water feature alone for ambiance, the fire alone, or both simultaneously for a dramatic effect.

The glass fiber reinforced concrete is durable, but it should be cleaned periodically with mild soap and water to remove debris. Because concrete is porous, we recommend applying a concrete sealer annually to maintain the finish and protect it from staining or weathering.

This unit is designed as a recirculating water feature, meaning it uses a pump to cycle the water through the bowl. You will need to provide a water source to fill the reservoir initially and occasionally top it off due to natural evaporation.

No, the burner system is specific to the fuel type you choose at the time of purchase. It is important to select either natural gas or propane before ordering, as the internal components are not designed to be converted safely after manufacturing.