Reliable Aftermarket Parts Front Drive Wheel for Self-Propelled Mowers

Check your current wheel's specifications against these measurements: an 8-inch diameter, 2-inch width, and a 1/2-inch bore. Most importantly, verify that your mower requires a 53-tooth gear drive and an offset hub design, as these are critical for the self-propulsion system to engage correctly.

Yes, this assembly includes the plastic bushing bearing type already installed. It is designed as a direct replacement, so you should be able to mount it onto your existing axle without needing additional hardware.

The bar tread pattern is specifically engineered to bite into turf and loose soil, providing superior traction when the self-propulsion system is engaged. This helps prevent wheel slippage, especially when mowing on inclines or damp grass.

No, this specific wheel is designed exclusively for the front drive position. The offset hub configuration is tailored to the geometry of front-drive systems and will not function correctly if installed on the rear axle.

If your mower requires a different tooth count, this wheel will not work. The 53-tooth gear must match your mower's pinion gear exactly; otherwise, the drive system will either fail to engage or cause premature wear on the gears.