Grand Canyon Gas Logs Vented Gas Logs

Unlike standard log sets designed to be viewed from one side, this model features a dual-burner system that ensures a balanced flame pattern visible from both the front and back. The logs are also sculpted to look realistic from every angle, preventing the 'backside' of the set from looking unfinished or artificial.

Yes, this is a vented gas log set. It must be installed in a fully functioning, wood-burning fireplace with an open damper or a chimney that meets local building codes to safely exhaust combustion byproducts.

This model uses a manual match-light ignition system. You will need to manually light the pilot or burner using a long fireplace lighter each time you wish to use the fireplace, as it does not include an automatic electronic ignition or remote control.

Yes, the manual valve allows you to control the flow of gas to the burners, which lets you adjust the flame height and heat output to your preference. However, because this is a high-capacity set, it is designed primarily for larger fireplaces that can accommodate that level of heat.

To ensure a safe and proper fit, your fireplace must have a minimum depth of 18 inches and a minimum height of 14 inches. Always measure your firebox carefully before ordering to ensure there is adequate clearance for the burner chassis and the log arrangement.

Absolutely. The logs are constructed from reinforced cement refractory with steel fibers, which are specifically engineered to withstand the high heat of a 103,000 BTU fire without cracking or degrading over time. The 304 stainless steel burner chassis further ensures the system resists corrosion and maintains performance through years of use.