Atomic Filament Carbon Fiber ASA

Yes, an enclosure is highly recommended. Because this material is based on ASA, it is prone to warping and shrinkage if the ambient temperature fluctuates, so maintaining a stable, heated environment is essential for successful prints.

Yes, you should use a hardened steel or ruby-tipped nozzle. Carbon fiber particles are abrasive and will wear down standard brass nozzles very quickly, leading to inconsistent extrusion and poor print quality.

Unlike the glossy finish often found on standard ABS, this carbon fiber ASA produces a sophisticated, matte, and slightly textured surface. This texture is excellent for hiding layer lines and giving functional parts a professional, finished look.

Absolutely. ASA is naturally UV-resistant, and the addition of carbon fiber further enhances its durability. It is an ideal choice for functional outdoor components that need to withstand sunlight and temperature changes without degrading.

We recommend using a nozzle size of 0.4 mm or larger. While a 0.4 mm nozzle works well, larger nozzles are less likely to clog due to the carbon fiber content and can help you achieve faster print speeds for structural parts.

The infusion of carbon fiber significantly increases the structural rigidity and strength of the material compared to standard ASA. This makes it a better choice for mechanical parts that need to resist bending or deformation under load.