Lddees DE510329P Dryer Heating Element

The most common sign is that your dryer runs through a full cycle but the clothes remain cold or damp at the end. If your dryer is spinning but not producing heat, the element is a likely culprit, though you should also check your thermal fuse and thermostat for continuity before ordering.

This part is designed to replace specific part numbers, including D510329P, AP6285328, 510329P, 503978, and 510329. Because Speed Queen models vary, we strongly recommend checking your original part number or your appliance's service manual to ensure an exact match.

This is designed for DIY installation and is generally considered a manageable project for most homeowners. You will typically need to remove the dryer's front or back panel to access the housing, so ensure you have a basic screwdriver set and always unplug the appliance before starting.

This element is constructed from a high-temperature resistant nickel-chromium alloy. This material is specifically chosen for its ability to withstand the intense, repeated thermal cycling required to dry heavy loads without becoming brittle or failing prematurely.

It is often a good practice to inspect your dryer's thermal fuse and cycling thermostat while you have the unit disassembled. If the heating element burned out due to restricted airflow, you should also thoroughly clean your dryer vent and exhaust duct to prevent the new element from overheating.