Pond and Garden Depot Foam Jet Fountain Nozzle

To achieve the full effect of the foam jet, you will need a pump with a flow rate between 1,200 and 4,000 GPH. If your pump is on the lower end of that range, expect a shorter spray height, while higher flow rates will push the water closer to the maximum four-foot height.

No, the nozzle does not include a 12V transformer. You will need to purchase a compatible 12V transformer separately to power the LED light ring.

This nozzle features a standard 1-inch MPT (Male Pipe Thread) connection. As long as your current plumbing setup uses a 1-inch female threaded fitting, it should be a direct, straightforward installation.

While this nozzle is made from high-quality, commercial-grade stainless steel, it is primarily designed for freshwater pond and fountain applications. We do not recommend using it in saltwater environments, as salt can accelerate corrosion even on high-grade steel.

The spray height is primarily controlled by the flow rate of your pump; increasing or decreasing the water flow will adjust the height accordingly. The nozzle itself creates a fixed aerated foam pattern, so you cannot change the shape of the spray, but you can control its intensity through your pump's settings.