MTD Line Trimmer Recoil Starter Pawl

If you pull the starter rope and feel no resistance, or if the rope pulls out but fails to engage and turn the engine over, the pawl is likely worn or broken. You can confirm this by removing the starter housing to inspect the pawl for rounded edges or physical damage.

This specific pawl, part number 753-06091, is designed for specific MTD models. Always verify your trimmer's model number against the manufacturer's parts list before purchasing to ensure a correct fit.

Generally, you will only need basic hand tools like a screwdriver or a socket set to remove the starter housing. Depending on your specific trimmer model, you may also need a pair of needle-nose pliers to manipulate the spring or retaining clip.

It is often a good idea to inspect the recoil spring while you have the housing open. If the spring feels weak or has lost its tension, replacing it alongside the pawl can save you from having to disassemble the unit again in the near future.

If the pawl is misaligned or worn, it will slip against the starter cup instead of catching it. This results in the 'slipping' sensation when pulling the cord and prevents the engine from cranking, effectively rendering the starter system useless.