Halo Skelta Wheel

The Skelta wheels are designed for modern mountain bikes with standard Boost spacing, featuring 15x110mm front and 12x148mm rear axle configurations. They use a 6-bolt disc brake interface and offer hub compatibility for HG, Micro Spline, and XD freehub bodies, covering most major drivetrain systems.

It is straightforward. The wheels arrive pre-fitted with tubeless tape, so you only need to install your valves, mount your tires, and add sealant to get rolling.

The 120 points of engagement provide near-instant power transfer when you pedal. You will notice significantly less 'dead space' in the crank rotation, which is particularly helpful for technical climbs or navigating tricky, slow-speed sections where quick bursts of power are necessary.

6069 T6 aluminum is a higher-grade alloy that allows for a stronger, stiffer rim without adding unnecessary weight. Combined with the seamless welded joint and shot-peened finish, this material choice significantly improves the wheel's fatigue resistance against the impacts of aggressive riding.

Yes, the front hub is designed to be convertible. This allows you to adapt the wheel to different axle standards if you decide to upgrade your fork or swap the wheel between bikes.

Absolutely. With a 30mm internal rim width, triple-butted spokes, and a durable 6069 T6 aluminum construction, these wheels are engineered specifically to handle the stresses of aggressive trail and enduro riding conditions.