Funsicle Replacement Hose Kit

This hose is designed for systems requiring a 1.5-inch diameter connection. As long as your pump and pool intake/outlet ports match this standard 1.5-inch size, it will be compatible.

Yes, the kit comes with one 59-inch hose and two screw-tightened clamps. You will not need to purchase additional hardware to secure the hose to your pump or pool wall.

While the hose is designed to be used at its full 59-inch length, it is constructed from flexible material that can be trimmed if you have a specific, shorter distance to bridge. Ensure you cut cleanly to maintain a proper seal with the clamp.

The materials used are standard for above-ground pool filtration systems. However, if you have a saltwater system, it is always best to rinse the hose connections periodically to prevent salt buildup that can degrade the clamps over time.

Slide the clamp over the hose end before attaching it to the port. Once the hose is fully seated on the fitting, tighten the screw clamp firmly until it is snug against the hose, ensuring it is centered over the connection point.