PUSH Industries SV Eight Rear Shock Mount Hardware Kit

You need to measure your frame's shock mount width and the bolt diameter. This specific kit is designed for a 22.2 mm frame mount width and an 8 mm bolt diameter, so verify those dimensions on your current setup before purchasing.

The DU bushing is a standard, reliable choice for rear shocks because it effectively reduces friction during suspension movement. It provides a smooth, consistent feel and is designed to handle the high loads typical of mountain biking.

Yes, if the noise is caused by worn-out hardware or play in the mounting interface, this kit will likely solve it. By replacing old, loose components with precision-engineered parts, you eliminate the movement that typically causes those annoying creaks.

You will generally need a shock bushing press tool to remove the old hardware and install the new DU bushing without damaging it. While some riders use a DIY setup with a vise and sockets, a dedicated press tool is the safest way to ensure a precise fit.

There is no set mileage, but you should inspect it whenever you service your rear shock or if you notice play when lifting the bike by the saddle. If you feel any movement between the shock eyelet and the frame bolt, it is time for a refresh.