Supernova Tail Light Cable for Bosch eBike

This cable is designed specifically for Bosch BES2 and BES3 drive systems. You should verify your bike's motor generation before purchasing to ensure the connector matches your drive unit's output port.

It means one end of the cable comes with the proprietary Bosch connector, while the other end has bare wires. This allows you to trim the cable to the exact length needed for your frame and solder or crimp it directly to your specific tail light.

The 200mm option is typically sufficient for lights mounted near the seat post or rack, while the 1400mm version is necessary for routing through the frame or for bikes with longer wheelbases. We recommend measuring your intended cable path with a piece of string before ordering to ensure you have enough slack.

Yes, you will need basic electrical tools such as wire strippers, a soldering iron or heat-shrink crimp connectors, and potentially a tool to remove your motor cover to access the drive unit port. If you are not comfortable working with eBike electrical systems, we recommend having a certified shop perform the installation.

Yes, because the cable is unterminated on one end, it is compatible with most standard eBike tail lights. Just ensure your chosen light is rated for the voltage output of your Bosch system, which is typically 6V or 12V depending on your specific motor configuration.