Real Fyre Charred Gnarled Split Gas Log Set

Vent-free gas logs are designed to burn efficiently enough that they do not require a chimney or flue to vent exhaust outside. This allows you to install them in existing fireplaces where the damper can be permanently closed, keeping all the generated heat inside your room.

Yes, this set is compatible with both fuel types. However, you must specify your fuel source at the time of purchase, as the burner system and gas valves are calibrated differently for natural gas versus propane.

Measure the width of your firebox at both the front and the back, as well as the depth. You need to ensure your fireplace meets the minimum depth requirement of 11 inches and that the log set width allows for proper clearance on the sides for the burner assembly.

The ignition system determines how you start the fire. Match-lit systems require a manual light with a lighter, while millivolt and electronic systems allow you to ignite the logs using a wall switch or remote control for added convenience.

These logs are designed for both ambiance and heating. With a heat output of up to 75,000 BTU, they function as a powerful supplemental heat source that radiates warmth throughout the room even after the burner is turned off.

Refractory ceramic is highly heat-resistant and durable. To ensure longevity, these logs are reinforced with internal steel rods, which prevent cracking and structural failure under the high temperatures of consistent use.