HHA Tetra RYZ Bow Sight

No, the Hoyt Edition is specifically engineered for the Hoyt Picatinny mounting system. If you do not have a Hoyt bow with this specific rail interface, you will need a standard dovetail or mounting version of the Tetra RYZ.

The double-pin design gives you the best of both worlds: a primary green pin for your main yardage and a secondary red pin that acts as a reference point for longer distances. This allows you to hold over or under without constantly adjusting your dial, which is critical when a target is moving.

Yes, the sight is multi-lens compatible, allowing you to add magnification if your setup requires it. You can also choose between .019 or .010 pin sizes depending on whether you prefer maximum visibility or a finer aiming point for longer shots.

The sight tapes provided are water-resistant, meaning they are designed to hold up against rain and moisture in the field. While they are durable, it is always good practice to ensure your housing is sealed properly if you are hunting in extreme downpours.

The Tetra RYZ Hoyt Edition provides 1st and 2nd axis leveling, which is sufficient for most hunting and 3D shooting scenarios. It does not include 3rd axis adjustment, so ensure your bow is properly tuned before heading out.

The wheel-forward design moves the adjustment dial away from the quiver, preventing interference when you are mounting or removing your arrows. It also allows for a more compact profile, making the sight feel less bulky on your bow.