Adafruit NeoPixel LED Strip

Yes, the strip is designed to be cut. You can trim it between any of the individual LED segments using standard scissors, allowing you to fit it perfectly into your specific project enclosure or space.

This strip requires a 5V DC power supply. Because it draws 4.8 watts at full brightness, ensure your power source can provide at least 1 Amp of current to keep the LEDs running reliably.

It features an IP65 rating, meaning it is protected against dust and low-pressure water jets. While it is weather-resistant and great for damp environments, it is not designed to be submerged in water or left exposed to harsh, long-term outdoor elements.

No, the strip is designed for plug-and-play use with most microcontrollers. However, adding a 300-500 ohm resistor on the data line and a large capacitor across the power pins is a best practice to protect the first pixel from power surges.

These LEDs are highly versatile and work with almost any microcontroller that supports 5V logic, including Arduino, ESP32, Raspberry Pi, and various Adafruit Feather boards. You will just need to use a compatible library, such as the Adafruit NeoPixel library, to control the data signal.