SRAM Ceramic Road Derailleur Pulley Bearing Grease

This formula is specifically engineered for the unique load and rotation requirements of derailleur pulley bearings. While it may work elsewhere, it is optimized for pulleys, so we recommend using a general-purpose bike grease for your bottom bracket or headset.

Ceramic-based lubricants are designed to reduce friction and handle the high-speed, low-load environment of derailleur pulleys more effectively than standard greases. This helps your drivetrain run smoother and can extend the lifespan of your bearings.

The syringe is designed for precision. Simply remove the cap, place the tip directly against the bearing seal or race, and apply a small amount of pressure to dispense a controlled bead of grease. This prevents over-greasing and keeps your drivetrain clean.

Frequency depends on your riding conditions and mileage. As a general rule, inspect and re-grease your pulleys every few months or after riding in particularly wet, muddy, or dusty conditions to keep them spinning freely.

Yes, this grease is compatible with both steel and ceramic bearing races. Its primary function is to provide low-friction lubrication and protection against contamination, regardless of the bearing material.