Industry Nine Torch Tubeless Tape

The tape should be wide enough to cover the spoke holes completely and extend slightly up the sidewalls of the rim bed, but it should not climb up the vertical rim wall. Measure your rim's internal width and choose a tape that is roughly 2-3mm wider than that measurement to ensure a proper seal.

Yes, this tape is universal and can be used on any brand of tubeless-ready bicycle rim, provided the 28mm width fits your specific rim bed dimensions.

A 10-yard roll (approximately 30 feet) is plenty for most riders. You can typically tape four to five standard 29-inch mountain bike wheels, assuming a single layer of overlap at the valve hole.

Absolutely. For the adhesive to bond securely and create an airtight seal, the rim bed must be completely clean and free of any old sealant residue, grease, or dirt. Use isopropyl alcohol to wipe down the rim surface thoroughly before application.

It is generally not recommended. Once the tape has been stretched and adhered to the rim, removing it usually compromises the adhesive and the airtight seal. It is best practice to re-tape the rim whenever you perform maintenance that requires removing the tape.