Mavic Allroad S Gravel Wheelset

The Allroad S Carbon wheelset uses standard 12x100mm front and 12x142mm rear thru-axle spacing, which fits the vast majority of modern disc-brake gravel bikes. Always double-check your frame's specific axle standards before purchasing.

The 25mm internal width is optimized for wider gravel tires, typically ranging from 30mm to 50mm. This wider profile supports the tire sidewalls better, which allows you to run lower pressures for increased comfort and traction without the tire feeling squirmy in corners.

Yes, while they are designed as a UST tubeless-ready system, you can certainly install standard inner tubes if you prefer. However, running them tubeless is recommended to fully utilize the puncture resistance and traction benefits of the rim design.

The adaptive layup reinforces high-stress areas like spoke holes while using less material in non-critical sections. This keeps the wheelset weight down to 1695g while maintaining the lateral stiffness needed for efficient power transfer and a lively, responsive feel on climbs.

These wheels are designed for Centerlock disc brake rotors. If you are currently using 6-bolt rotors, you will need to switch to Centerlock rotors or use a 6-bolt to Centerlock adapter.

The Instant Drive 360 system is designed for tool-free maintenance. The end caps pull off by hand, allowing you to easily access the freehub body for cleaning and lubrication, making it straightforward to keep the engagement smooth over time.