Ciclovation Tubeless Rim Tape

This tape is designed for tubeless-ready rims. While the 24mm width is a common standard for many road and gravel wheelsets, you should measure the internal width of your rim bed to ensure it provides full coverage from sidewall to sidewall.

Polyester tape is generally easier to work with than thinner, stretchier alternatives. It offers enough rigidity to lay down smoothly without kinking, which helps prevent air bubbles that could compromise your tubeless seal.

A 10-meter roll is typically sufficient to tape four standard 700c or 29-inch wheels, assuming you use a single layer with a slight overlap at the valve hole. If you prefer a double-wrap for extra security, expect to get two wheels out of one roll.

Yes, proper preparation is critical. You must thoroughly clean the rim bed with isopropyl alcohol to remove any grease, old sealant residue, or factory lubricants, otherwise the adhesive will not bond properly and the tape may lift.

Yes, the polyester material is durable enough to handle the higher pressures associated with road tubeless systems. Ensure you apply it with firm, consistent tension to create a tight, reliable seal.