Peaty's Tubeless Rim Tape

You should measure the internal width of your rim bed and add 2-3mm to ensure the tape covers the spoke holes completely and reaches slightly up the sidewalls. If your rim's internal width is around 34-35mm, this 37mm tape is the correct fit.

For the best results, clean your rim bed thoroughly with isopropyl alcohol to remove any residue before applying. Pull the tape tight as you lay it down to prevent air bubbles, and ensure you overlap the tape by a few inches past the valve hole.

The cloth strips are designed to be placed over the end of the tape once you've finished wrapping the rim. They provide extra security to prevent the tape from lifting or peeling over time, which is a common failure point in tubeless setups.

Yes, this tape is designed for both disciplines. Its high-tensile, dual-layer construction is robust enough to handle the higher pressures of road tires and the rugged demands of mountain biking.

A 10-meter roll is plenty for most riders. It is typically enough to tape four standard 29-inch mountain bike wheels or five 700c road wheels, assuming you are doing a single layer wrap.