SRAM X-Sync 2 Eagle Chainring

The X-Sync 2 is specifically engineered for SRAM Eagle chains. While it is compatible with 10, 11, and 12-speed setups, it will perform best when paired with an Eagle-specific chain to ensure the tooth profile engages correctly.

The 3mm offset is designed for Boost spacing frames (148mm rear axle width). If your mountain bike uses the Boost standard, this is the correct chainring to ensure proper chainline and shifting performance.

Yes, the tooth geometry is designed to minimize friction and chain vibration. By reducing the mechanical stress between the chain and the ring, it operates noticeably quieter than standard chainrings, especially under load.

No, this chainring is strictly for 1x drivetrains. The tooth profile is specifically shaped to retain a single chain without the need for a front derailleur or chain guide.

The aluminum used is chosen for its balance of strength and weight. It is durable enough to handle the mechanical stress of aggressive riding, though like all aluminum components, it will eventually show wear depending on your mileage and riding conditions.

This chainring uses the SRAM 3-bolt Direct Mount standard. It attaches directly to your crank arm, eliminating the need for a separate spider and reducing overall system weight.