Fox Suspension 38 Performance Elite Fork

The Performance Elite series offers the same internal damper technology and chassis performance as the top-tier Factory line, but it lacks the Kashima coating on the stanchions. You get the same high-end damping and stiffness, just with a black anodized finish instead of the signature gold.

Yes, the GRIP X2 damper is highly tunable, allowing you to adjust high-speed and low-speed compression, as well as high-speed and low-speed rebound. This makes it an excellent choice for riders who want to dial in their suspension response for specific trail conditions.

Yes, while the fork comes set up for a 200mm rotor, it is compatible with rotors up to 230mm. This provides extra stopping power for aggressive enduro riding or heavier riders.

The bleed buttons allow you to equalize the air pressure inside the lower legs with the outside atmosphere. This is particularly useful if you are riding at high altitudes or after significant temperature changes, as it helps maintain the fork's intended suppleness and sensitivity.

No, this specific model is designed exclusively for 29-inch wheels. The chassis geometry and offset are optimized for the larger wheel diameter.

Yes, the reinforced, skeletonized arch design significantly increases the torsional stiffness of the fork. This helps the front wheel track more accurately through rock gardens and technical sections, reducing flex when you are pushing hard into corners.