Wolf Tooth Seatpost Clamp

You need to match the clamp size to the outer diameter of your seat tube, not the diameter of your seatpost itself. Most manufacturers list this specification on their website or frame geometry chart, but you can also measure your seat tube accurately using a set of digital calipers.

Yes, it is compatible with carbon frames and posts, provided you use the correct size and do not exceed the 6 Nm torque limit. We always recommend using a small amount of carbon assembly paste to ensure a secure hold without needing to overtighten the bolt.

This indicates that the clamp is engineered to accommodate slight variations in frame manufacturing. If your frame's seat tube outer diameter is within 0.5mm of the clamp's nominal size, it will provide a secure, reliable fit.

The spherical washer allows the bolt to pivot slightly as you tighten it. This ensures the bolt head sits flush against the clamp, preventing uneven stress on the threads and providing more consistent clamping force.

Installation is straightforward and requires only a 4mm hex key. Simply slide the old clamp off, clean the seat tube, slide the new Wolf Tooth clamp on, and tighten the bolt to the recommended torque specification.