Hydro-Logic Stealth-RO150 Filter & Membrane Kit

No, this kit is specifically engineered for the Hydro-Logic Stealth-RO150 system. Using these filters in incompatible units may result in poor filtration performance or improper sealing.

While replacement frequency depends on your water quality and usage volume, a general rule of thumb is to replace the sediment and carbon filters every 6 months. The membrane typically lasts longer, often up to 12 to 24 months, but should be replaced sooner if you notice a drop in water pressure or quality.

Yes, this kit is designed to handle both sources. Whether you are dealing with sediment and rust from a well or chlorine and chemical additives from city water, the three-stage filtration process is built to address those specific contaminants.

This kit provides a complete refresh for your system, including a high-efficiency sediment filter to trap debris, a specialized carbon filter for chemical reduction, and a high-output reverse osmosis membrane for final purification.

If your current flow rate has slowed down, replacing these filters will likely restore it. Clogged sediment and carbon filters are the most common culprits for reduced flow, so a fresh kit should bring your system back to its optimal 1 GPM performance.