Gatco Edgemate Knife Sharpening System

The Gatco system uses a precision angle guide with six pre-set slots. By clamping your knife into the holder and selecting the corresponding slot on the guide rod, you lock in a consistent angle for every stroke, removing the need to hold a steady hand freehand.

Yes. The kit includes a specialized triangular-shaped serration hone designed specifically to fit into the scallops of serrated blades, allowing you to sharpen each serration individually.

Absolutely. Because the clamp and guide rod system physically prevents you from changing the angle mid-stroke, it is much more forgiving than freehand sharpening stones. It is an excellent tool for learning how to maintain proper edge geometry without the risk of ruining your blade.

No, the kit is comprehensive. It includes the clamp, the angle guide, four different hones (extra-coarse, medium, fine, and serration), and a bottle of honing oil, all packed inside a custom storage case.

It depends on the condition of your blade. If you are reprofiling a very dull or damaged edge, you will spend more time with the extra-coarse hone, but routine maintenance using the fine and medium hones typically takes only a few minutes per side.

The included hones are effective on most standard knife steels, including stainless and carbon steel. However, if you are sharpening extremely hard, high-end super steels, you may find that the process takes longer and requires more patience than it would with diamond-based abrasives.