Wolf Tooth SRAM Direct Mount Chainring

This chainring is designed for SRAM cranksets that utilize the 3-bolt direct mount interface. Before purchasing, verify that your crankset is compatible with the 3-bolt standard, as some newer SRAM models use an 8-bolt interface.

The 3mm offset is specifically designed for Boost spacing (148mm rear axle spacing). It ensures your chainline is correctly aligned to prevent excessive wear and shifting issues on modern mountain bike frames.

Yes, while this chainring is optimized for 12-speed chains, it is fully compatible with 10, 11, and 12-speed drivetrain systems. The narrow-wide tooth profile works effectively across all these configurations.

The alternating wide and narrow teeth are machined to match the inner and outer links of your chain perfectly. This creates a tight, secure fit that prevents the chain from dropping, even when riding over rough, technical terrain.

No, this specific model is not compatible with power meters. If you are running a spider-based power meter, you will need a different chainring interface.

The tooth profile is engineered with specific clearances that allow mud and debris to clear away from the chainring teeth as the crank rotates. This helps maintain consistent engagement and prevents the chain from skipping in wet, sloppy conditions.