Shake Junt Hardware

The 1.25-inch length is necessary when you are using riser pads. Because the risers add 0.25 inches of thickness between your trucks and the deck, you need the extra bolt length to ensure the nuts can fully engage with the threads for a secure, safe mount.

Riser pads are primarily used to prevent 'wheel bite,' which happens when your wheels touch the deck during sharp turns or heavy landings, causing you to stop abruptly. If you ride loose trucks or larger wheels, risers are a simple, effective way to create that extra clearance.

Yes, this hardware uses the industry-standard bolt pattern, so it is compatible with virtually all modern skateboard decks and trucks. Just ensure your deck thickness and truck baseplate height are standard to confirm the 1.25-inch bolt length is appropriate for your specific setup.

Yes, this kit includes the necessary bolts and nuts to attach your trucks, along with the riser pads. You will only need a standard skate tool or a screwdriver and a wrench to complete the installation.

Your hardware should be tightened until the bolt heads are flush with the top of your grip tape. Avoid overtightening, which can crack the wood of your deck, but ensure they are snug enough that the trucks do not wiggle or shift when you apply pressure.