Azodin Eye Wire

If your marker is experiencing frequent misfires, chopping paint, or failing to detect balls in the breech, the eye wire is a likely culprit. Inspect the wire for visible fraying, kinks, or broken connections, which often occur from repeated assembly and disassembly.

This wire set is designed for standard Azodin electronic markers, but compatibility can vary by specific model generation. We recommend checking your marker's manual or comparing the connector type on your current wire to ensure a perfect match before purchasing.

Yes, replacing the eye wire is a straightforward task that typically requires only basic tools like hex keys. You will need to carefully open the marker's grip frame or body to access the board, disconnect the old wire, and route the new one exactly as the original was positioned.

The most critical step is ensuring the wire is routed correctly so it doesn't get pinched or crimped when you reassemble the marker body. Take your time to seat the connectors firmly into the board, as a loose connection will cause the electronic eye system to fail immediately.