microSHIFT Acolyte Cassette

The Acolyte cassette is designed to fit standard Shimano HG freehub bodies, which are the most common standard on mountain and hybrid bikes. As long as your current wheel uses an HG-compatible hub, this will install without any modifications.

No, this cassette is specifically engineered to work with the microSHIFT Acolyte 8-speed rear derailleur. Because of the wide range and specific tooth profiles, it requires the Acolyte derailleur to ensure proper shifting and chain retention.

Yes, because the largest cog is 46 teeth, you will likely need a longer chain than what you were running on a standard 8-speed drivetrain. Always check your chain length during installation to ensure the derailleur can handle the full range of gears without overextending.

The ED (Electrophoretic Deposition) coating is a durable finish applied to the steel cogs to resist corrosion. It is significantly more resilient against rust and wear from wet, muddy, or salty environments compared to standard untreated steel.

Absolutely. The 11-46t gear range is specifically designed to provide a very low gear ratio, making it much easier to pedal up steep, technical climbs compared to traditional 8-speed cassettes that typically have smaller maximum cogs.