DT Swiss XR 1700 Spline MTB Wheel

This wheel is designed for frames using the 12x148mm Boost thru-axle standard. Please verify your frame's rear spacing before purchasing, as it will not fit older non-Boost frames.

The hub is equipped with a SRAM XD driver body, which is compatible with SRAM 11 and 12-speed cassettes. If you are running a Shimano drivetrain, you will need to swap the freehub body.

Yes, the rim is tubeless-ready. You will just need to install tubeless tape, a valve stem, and sealant to set up your tires without inner tubes.

The 36T Ratchet SL system provides 10 degrees of engagement, which is a noticeable upgrade over standard pawl-based hubs. This means you will feel more immediate power transfer when you start pedaling, especially on technical climbs.

A 25mm internal width is optimized for modern cross-country tires, typically ranging from 2.1 to 2.35 inches. This width provides a stable tire profile that prevents the tire from squirming in corners while allowing you to run lower pressures for better traction.

While straight-pull spokes are slightly less common than traditional J-bend spokes, they are widely available at most bike shops. They are designed to increase wheel rigidity and durability, so you shouldn't need to replace them often.