Industry Nine Torch on ENVE HV60 MTB Wheel

The 120-point engagement system provides near-instant power transfer, meaning there is virtually no lag between when you start pedaling and when the wheel begins to drive forward. This is particularly helpful for technical climbing or navigating tight, punchy trail sections where quick bursts of power are necessary.

This wheel is designed to handle a wide spectrum of riding, from XC racing to aggressive trail and enduro use. The combination of the durable ENVE carbon rim and the robust Industry Nine hub makes it stiff and responsive enough for competitive racing while remaining tough enough for rowdy, technical terrain.

By molding the carbon fiber continuously around the spoke holes rather than drilling through cured carbon, the rim maintains its structural integrity. This process allows for higher spoke tension without the risk of cracking or pulling through, resulting in a stiffer, longer-lasting wheel.

Yes, the rim is tubeless-ready. Because the manufacturing process uses a removable bladder system to keep the interior clean and free of debris, you will find it much easier to seat tubeless tires and achieve a reliable airtight seal.

This wheel is built with a 15x110mm Boost thru-axle standard. You should verify that your fork is compatible with the Boost spacing before purchasing, as it will not fit older, non-Boost forks.

The angled flanges are designed to reduce stress on the spokes where they meet the hub. By aligning the flange angle with the spoke path, the system minimizes fatigue and potential spoke breakage, contributing to a more reliable wheel build over the long term.