Wheels Manufacturing Bearing Extractor

No, this specific extractor is precision-engineered exclusively for 29mm inner diameter 6806 bearings. Using it on different bearing sizes may result in improper fit or damage to your hub components.

A dedicated extractor applies even, controlled pressure to the bearing race, which significantly reduces the risk of marring or cracking your hub shell. Using a punch and hammer often leads to uneven force that can permanently damage expensive hub internals.

Yes, this is an extraction tool, not a complete press system. You will typically need a compatible press or handle assembly to drive the extractor through the bearing, depending on your specific hub configuration.

While the tool is designed to be safe for most hub materials, you should always exercise extreme caution with carbon fiber. Because carbon is less forgiving than alloy, ensure the extractor is perfectly seated before applying any force to avoid stress fractures.

The easiest way is to check the markings on the rubber seal of your current bearing, which usually lists the model number. If the markings are worn off, you can measure the inner diameter with digital calipers; if it measures exactly 29mm, this is the correct tool.