Stan's No Tubes Tubeless Rim Tape

You should measure the internal width of your rim bed. Ideally, the tape should be wide enough to cover the spoke holes completely and run up the sidewalls slightly, but not so wide that it interferes with the tire bead seating.

Yes, this tape is designed to work with any tubeless-compatible rim, regardless of the manufacturer. The key is ensuring the width matches your specific rim's internal dimensions.

Absolutely. For the adhesive to create a reliable, airtight seal, the rim bed must be completely clean and free of any residue, old sealant, or oils. Using isopropyl alcohol to wipe down the rim before application is highly recommended.

A 10-meter roll is typically enough to tape five wheels, assuming a standard 29-inch rim size. If you are running smaller wheels, you may get a bit more mileage out of the roll.

It is best practice to start your tape application a few inches before the valve hole and overlap it a few inches past the hole. This double layer of tape around the valve area helps create a more secure, leak-free seal when you install your tubeless valve stem.