Enduro S Hydra Rear Wheel

The Hydra hub's 690 points of engagement provide near-instant power transfer, meaning there is virtually no lag between your pedal stroke and the wheel moving. This is particularly beneficial for technical climbing or navigating tight, punchy sections where you need immediate acceleration.

This specific model features 157mm hub spacing, which is the Super Boost Plus standard. Please verify that your frame is designed for 157mm spacing before purchasing, as it is not compatible with standard 148mm Boost frames.

The wheel comes equipped with a SRAM XD freehub body. It is designed to work with SRAM XD-compatible cassettes; if you are running a Shimano Micro Spline or HG drivetrain, you will need to swap the freehub body.

The 30.5mm internal width is optimized for modern enduro tires, typically ranging from 2.3 to 2.6 inches. This width provides a stable base for the tire casing, reducing sidewall squirm during hard cornering and allowing you to run slightly lower pressures for better traction.

Yes, the rim profile is tubeless-ready. You will just need to add your preferred tubeless tape, sealant, and a tubeless-compatible valve stem to complete the setup.

While straight-pull spokes require specific tensioning, they are standard Industry Nine components. Most reputable bike shops can source replacements easily, and the wheel's 28-spoke count offers a good balance of durability and serviceability for aggressive riding.