Cane Creek VALT Rear Shock Spring

Unlike a linear spring that can feel like it blows through its travel too easily, this progressive spring ramps up as it compresses. You will notice more support deep in the stroke, which helps prevent harsh bottom-outs while keeping the initial part of the travel supple.

The most critical measurement is the 36.5mm inner diameter, which is specific to certain coil shocks. You must verify that your shock body is compatible with this diameter and that your shock's stroke length matches the 55mm specification.

Yes, the VALT spring is engineered from high-performance steel specifically to reduce weight compared to traditional, heavier steel coils. While it won't be as light as a titanium spring, it offers a significant weight savings over standard stock springs without sacrificing durability.

This range indicates the spring's stiffness, which determines how much force is required to compress it. Because this is a progressive spring, it starts at a lower rate and ramps up to the higher end of that range, allowing you to tune your suspension for both small-bump sensitivity and big-hit support.

Generally, you do not need specialized tools, but you will need to remove the shock from your bike frame to access the spring collar. Once the shock is off, you simply back off the preload collar to slide the old spring off and swap in the new one.