Shimano SLX M7000-11 Chainring

No, this specific chainring is designed exclusively for 2x (double) setups. It is intended to be used as the outer ring in a 36-26t configuration and will not function correctly on a 1x drivetrain.

While it features a 96mm bolt circle diameter, it is specifically engineered for the Shimano SLX M7000-11 crankset. You should verify that your crankset is compatible with Shimano's asymmetric bolt pattern before purchasing.

This chainring is optimized specifically for 11-speed drivetrain systems. Using it with a 10-speed or 12-speed chain may result in poor shifting performance and accelerated wear on your components.

It is highly recommended to replace both the inner and outer chainrings at the same time. Replacing only one can lead to uneven wear, which often causes skipping or poor shifting performance.

You will typically need a set of hex keys (Allen wrenches) to remove the chainring bolts. Depending on your specific crank setup, you may also need a T30 Torx wrench for the bolts.