Easton Chainring Bolts and Nuts

These bolts feature a standard 8mm thread diameter, but compatibility depends on your specific crankset's bolt pattern and thickness. Always verify your crankset manufacturer's specifications before installation to ensure the bolt length and diameter match your setup.

Yes, this pack contains four bolts and nuts, which is the standard requirement for most single and double chainring setups. If you are running a triple crankset or a specific configuration requiring five bolts, you will need to purchase additional hardware.

Alloy bolts are significantly lighter than steel alternatives, helping to reduce rotational mass on your drivetrain. While they offer excellent strength for most riding conditions, they require careful installation with a torque wrench to prevent stripping the threads.

While not strictly required, applying a small amount of medium-strength threadlocker is a good practice to prevent the bolts from vibrating loose over time. Ensure the threads are clean and dry before application for the best results.

It is highly recommended to replace the entire set, including the nuts, when installing new bolts. Mixing old and new hardware can lead to uneven tension or thread mismatch, which may compromise the security of your chainrings.