Industry Nine Hydra MTN Hub Endcaps

No, these specific end caps are designed exclusively for Industry Nine Hydra hubs. They will not fit older Torch series hubs or other manufacturers' systems.

Torque Caps feature a larger interface surface area that sits flush against the fork dropouts. This creates a stiffer connection between the hub and the fork, which can improve steering precision and front-end rigidity.

Generally, no. Industry Nine Hydra end caps are designed to be press-fit by hand. You simply pull the old caps off and push the new ones into place until they seat securely.

These end caps are specifically designed for Torque Cap-compatible forks. While they will physically fit a standard 15x110mm Boost fork, the oversized diameter of the Torque Cap interface may not seat properly in standard dropouts, potentially causing alignment issues.

Check your fork's specifications or look at the dropouts. Torque Cap-compatible forks have a distinct, larger recessed area designed to accept the wider diameter of the end cap. If your fork dropouts look standard, you likely need the standard Hydra end caps instead.