Boyd Cycling Ridgeline

Yes, the Ridgeline rear wheel is built with 148 x 12mm Boost spacing, making it compatible with the vast majority of modern enduro mountain bike frames.

The hookless design removes the bead hook from the rim wall, which creates a stronger, more impact-resistant structure. This allows the carbon to be thicker in critical areas, helping the wheel survive harsh trail impacts without cracking.

With a 30mm internal width, this rim is optimized for high-volume enduro tires, typically ranging from 2.3 to 2.6 inches. This width provides a stable base that prevents tire squirm when cornering hard at lower pressures.

The offset rim bed helps equalize the spoke tension between the drive side and the non-drive side of the wheel. This results in a stronger, more durable build that stays true longer, even when subjected to the high torque of enduro riding.

The Tripel hub is designed for high engagement, meaning there is very little lag between when you start pedaling and when the power is transferred to the wheel. This is particularly useful for technical climbing or ratcheting through rocky sections where immediate engagement is critical.

The wheel uses a standard Presta valve setup. While it comes ready for tubeless, ensure you use high-quality tubeless tape and sealant compatible with the 30mm internal width to maintain a reliable airtight seal.