Burgtec Offset Shock Hardware

Offset shock hardware changes the effective eye-to-eye length of your rear shock. By shortening this measurement, you can slacken your head tube angle and lower your bottom bracket height, which generally improves stability and handling on steep, technical terrain.

No, compatibility is specific to your frame's shock mount dimensions. You must measure your current hardware width and bolt diameter to ensure you select the correct size, such as the 22.0mm x 8mm or 30.0mm x 8mm options.

It is a straightforward swap if you are comfortable removing your rear shock. You simply replace your existing shock mounting hardware with the Burgtec offset kit, though you should ensure you have the proper tools to remove and press in the new bushings.

You need to measure the width of your frame's shock mount and the diameter of the mounting bolt. If you are unsure, check your bike manufacturer's technical manual or the specifications of your current rear shock to confirm the required hardware dimensions.

No, this is a static adjustment. While it allows you to tune your bike's geometry, it requires unbolting the shock and swapping the hardware, so it is intended for setting up your bike for specific trail conditions rather than mid-ride adjustments.