Rene Herse Humptulips Ridge TC Tire

The Humptulips Ridge uses a specific, large-knob design that mimics a slick tire's contact patch when rolling on hard surfaces. The knobs are strategically placed to support each other, preventing the squirm typically felt with aggressive off-road treads.

The casings range from the Extralight, which prioritizes speed and suppleness, to the Endurance and Endurance Plus, which add layers of puncture protection and sidewall reinforcement. Choose Extralight for racing or smooth surfaces, and the Endurance options if you frequently ride in sharp, rocky terrain.

Yes, they are fully tubeless-compatible. You can run them with or without tubes, though using them tubeless allows you to run lower pressures for better traction and comfort while reducing the risk of pinch flats.

They are designed for 26-inch wheels with an inner rim width between 19 mm and 30 mm. They work well on both hookless and hooked rims, but be sure to check your frame clearance, as the tire measures approximately 52 mm wide on a 20 mm internal rim.

The tread blocks are staggered in a specific pattern that creates overlapping sound frequencies. These frequencies partially cancel each other out, significantly reducing the 'hum' or vibration noise typically associated with knobby tires on asphalt.

The maximum recommended pressure is 55 psi (3.8 bar), regardless of whether you are running them with tubes or set up tubeless. For most gravel and all-terrain riding, you will likely find better performance and comfort at significantly lower pressures.