Santa Cruz Nomad Bushing Kit

No, this specific bushing kit is engineered exclusively for the first-generation Nomad equipped with a Fox DHX Coil shock. It is not designed to fit other Santa Cruz frames or different shock models.

Yes, this kit is versatile and can be used to service either the front or the rear shock eyelet on your Nomad 1. If you need to replace the bushings on both ends of the shock, you will need to purchase two kits.

The most common indicator is a noticeable 'clunk' or play in the rear suspension when you lift the bike by the saddle. If you feel movement between the shock eyelet and the mounting hardware, it is time to replace the bushings to restore smooth performance.

While you don't need highly specialized shop equipment, you will need a basic bushing press tool to remove the old bushings and seat the new ones without damaging them. A simple DIY press or a bench vise with the correct drifts can also work if you are careful.

No, this kit only addresses the physical interface between the shock eyelet and the frame mounting hardware. If your shock is leaking oil or losing air pressure, you will need a full shock service or rebuild, not just a bushing replacement.