Seekins Precision Scope Base Screws

Yes, these screws are specifically engineered to fit the standard Remington 700 action footprint. They are designed to provide a secure, precise fit for the factory-drilled holes on these models.

The 30 MOA cant built into the base angles your scope downward, which effectively tilts the reticle to allow for more elevation adjustment in your scope's turrets. This is essential for long-range shooting, as it helps you dial in shots at extended distances without running out of internal elevation travel.

You will need a high-quality Torx or hex driver, depending on the specific screw head type, and a torque wrench is highly recommended. It is important to use the correct torque settings specified by your scope base manufacturer to ensure the screws hold securely without stripping the threads.

The screws feature a standard matte black finish designed to blend seamlessly with most black scope bases and receivers. While slight variations in sheen can occur between different manufacturers, they generally provide a clean, uniform look once installed.

Yes, applying a small amount of a medium-strength thread locker, such as blue Loctite, is standard practice. This helps prevent the screws from backing out due to recoil while still allowing for removal if you need to swap your optics later.