Focal Trio 6 ST6

The Dual Focus mode effectively gives you three monitors in one. It allows you to switch between a full-range 3-way configuration and two different 2-way modes, which helps you check your mix translation on smaller systems without needing to swap out speakers.

While the Trio 6 ST6 offers incredible precision, it is a substantial 3-way monitor weighing over 55 pounds. It is best suited for medium-to-large control rooms where you have the space to let the 8-inch woofer and laminar port breathe properly.

In most professional and project studio environments, you will not need an external subwoofer. With a frequency response reaching down to 35Hz, these monitors provide sufficient low-end extension and definition for critical mixing tasks.

Yes, the rear panel features comprehensive EQ controls, including high-frequency and low-frequency shelving, as well as a low-mid EQ. These allow you to fine-tune the monitor's output to compensate for room modes or specific acoustic challenges in your workspace.

The Trio 6 ST6 uses a balanced XLR input with a 10kΩ impedance. You will need a standard balanced XLR cable to connect these to your audio interface or monitor controller.

No, the automatic standby mode is dis-engageable. You can easily toggle this feature off via the controls on the back of the unit if you prefer the monitors to stay powered on at all times.