SPL P8 Microphone Preamp and A/D Converter

No, the ADAT converter is an optional module. You will need to purchase and install it separately if you require digital connectivity for your audio interface.

Yes, the P8 provides a gain range up to +62 dB, which is sufficient for most ribbon microphones. Just ensure you keep the 48V phantom power switched off unless your specific ribbon mic requires it.

The unit features balanced analog line outputs via DB25 connectors. If you have the optional ADAT module installed, you can connect it digitally to your interface using optical cables for up to eight channels of high-resolution audio.

The 20 dB pad reduces the input signal level before it hits the preamp circuitry. This is essential when recording very loud sources, such as drums or guitar cabinets, to prevent clipping and distortion.

Yes, if you have the optional AD converter module installed, the unit includes Word Clock synchronization. This allows you to lock the P8 to your master clock for stable, jitter-free digital recording.

Yes, the high-pass filter is fixed at 80 Hz with a slope of 6 dB per octave. It is designed to help you clean up low-end rumble or proximity effect from your microphones during the tracking stage.