Spinlock Deckvest

The re-arming kit must match the specific CO2 cylinder size and firing mechanism type required by your Deckvest model. Always check the label inside your life jacket or consult your owner's manual to confirm the correct cylinder weight and firing head type before purchasing.

Installing the kit is straightforward and typically involves unscrewing the used cylinder and firing head, then screwing in the new components. However, it is critical to follow the included instructions precisely to ensure the mechanism is seated correctly and the safety indicator shows green.

You should perform a visual inspection of your life jacket before every voyage, checking that the firing indicator is green and the cylinder is tight. It is also recommended to perform a full service according to the manufacturer's schedule, typically every one to two years, depending on usage and environment.

No, you should never attempt to reuse a cylinder that has been punctured or shows signs of corrosion. If the cylinder is damaged, rusted, or has lost weight, it must be replaced immediately to ensure your life jacket will inflate reliably in an emergency.

The firing mechanism contains the water-sensitive element or firing pin that triggers the inflation. Replacing both the cylinder and the firing head ensures that the entire system is fresh, compliant, and free from any degradation that could cause a failure.