Corsair DOMINATOR

This kit is designed for DDR5-compatible motherboards only. It will not fit into DDR4 slots, so please verify your motherboard's memory support before purchasing.

To run this memory at its rated 6400MHz speed, you must enable the Intel XMP 3.0 profile in your motherboard's BIOS. Without this step, the RAM will default to a standard, slower JEDEC speed.

While the RGB lighting is fully customizable, you will need to use Corsair's iCUE software to manage the 11-zone LEDs and create custom profiles. The software is required to unlock the full range of lighting effects.

While this kit is optimized for Intel XMP 3.0, it can often run on AMD platforms. However, you may need to manually adjust settings in your BIOS, as AMD systems typically use EXPO profiles for plug-and-play overclocking.

A CAS latency of 32 is quite tight for DDR5-6400 memory, meaning the RAM can access data faster. This lower latency helps reduce system bottlenecks, resulting in smoother performance during gaming and intensive multitasking.

The Dominator RGB modules are taller than standard, low-profile RAM due to the aluminum heat spreader and RGB light bar. It is recommended to check your CPU cooler's clearance specifications to ensure there is no physical interference.